AUTONET TV

Out with the Old (Vehicle Parts that Wear Out)

Some drivers don't pay any attention to their vehicles until something breaks.  Others take them into their service repair facility for maintenance even before a problem develops.  Still, even if you fit into the second group, there are some parts on a vehicle that will simply wear out over time.

Your vehicle has gaskets in several places.  They use a flexible material to seal the gaps between metal parts that fit together. After time, that material shrinks or gets brittle and fails.  Eventually, after time, you will have to get gaskets replaced.

Same goes for belts.  Your engine has belts that help take the mechanical energy of the engine to drive other parts such as the generator and air conditioner.  Heat and age will eventually cause these belts to wear out or break, so you'll need new ones at some point.

You'll also find yourself buying brake pads.  As much as you may try to go easy on them, brake pads work by wearing off a little bit of them each time they help you stop your vehicle.  Do a lot of stop-and-go driving and you'll hasten the process.

No battery lasts forever, and your vehicle's battery is no exception.  It can only charge and discharge electricity so many times.  Count on getting no more than 4 or 5 years out of a battery, fewer if you live in a very hot spot.

Other parts that don't age well? Tires.  They can have plenty of tread left on them, but rubber gets old and loses its flexibility. Tires have their date of manufacturer stamped on them for a reason.

Finally, your muffler is being subject to moisture from inside and out: inside because of moisture-containing exhaust and outside from the elements outdoors. Stainless steel or other alloys will last longer, but after a while, either the moisture or constant pounding from vibrations will take their toll.

That's why it's important to maintain every part on your vehicle. You can't wave a magic wand and make everything last forever, but take care of your vehicle and it'll take care of you.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

Ready, Set, COLD! (Getting Vehicle Ready for Winter)

When the temperatures plunge, your vehicle better be ready because it faces a whole new set of challenges.  Rubber stiffens, glass fogs, fluids freeze.  Just thinking about it can get your heart beating faster.  So here are some tips for getting ready for those inevitable colder temperatures.

Make sure your tires are in good shape and properly inflated.  Traction can be less than ideal on slippery streets, so your tires must have enough tread to grip the road.  They should also be inflated properly, and inflation will change as the temperatures go down. One last thing on tires. Do you know how old yours are? They actually have a birthdate printed on them.  Old rubber can compromise drivability and handling.  Some tires look great but their rubber doesn't handle stresses like it used to.  Have your vehicle service facility inspect all of these aspects of your tires so you are riding on tires that are fit to go.

Anyone who lives in an area where the temperatures get down to freezing knows frigid mornings can reveal an unhealthy battery at the most inopportune time.  Age also counts when it comes to batteries, so you should know how old and healthy yours is.  Special equipment at your service facility can let you know how much more life you can expect out of that battery.  It's obviously better to have it replaced before rather than after it fails.

You have to see out your windows and windshield in order to drive safely, so now's the time to have your heater and defroster checked out to make sure they can do their jobs.  A few tweaks here and there can make a big difference before you find yourself shivering and fogged up.

And finally, make sure you have some vital emergency supplies.  Yes, a blanket can save your life if you are stranded in cold weather.  A small shovel can help you dig out of a slippery spot.  And your survival may depend on having a little extra food and water on hand, so keep a little supply of bottled water and power bars stored away. Doesn't hurt to have an extra cell phone charger in your vehicle, either.

You may have heard all of this before.  Well, trouble happens when you least expect it. Taking a few minutes now can make a huge difference when it rears its ugly head later.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

How Your Check Engine Light Works

Have you ever had an experience like this in Newark, NY? You drive through the one of those automatic car washes. When you get to the end, where the dryer is blowing, your Check Engine light starts flashing!

You fear the worst, but within a block or two, the light stops flashing, but stays on. By the next day, the light is off.

You wonder; "What was going on?" Well, it's actually a good lesson in how the Check Engine light works.

Your air intake system has a sensor that measures how much air is coming through it. When you went under the high-speed dryer, all that air was blasting past the sensor. Your engine computer was saying, there shouldn't be that much air when the engine is just idling. Something's wrong. Whatever's wrong could cause some serious engine damage.

Warning, warning! It flashes the Check Engine light to alert you to take immediate action.

It stopped flashing because once you were out from under the dryer, the airflow returned to normal. Now the engine control computer says the danger is past, but I'm still concerned, I'll keep this light on for now.

Then the Check Engine light goes off in a day or two.

The condition never did recur, so the computer says whatever it was, it's gone now. The danger is past, I'll turn that light off.

Now a flashing Check Engine light is serious. You need to get it into Union Street Automotive as soon as possible. But if it stops flashing you can wait a few days, so you have time to see if the problem will clear itself or if you need to get it checked. How does the computer know when to clear itself?

Think of it this way. The engine control computer is the brain that can make adjustments to manage the engine. Things like alter the air-to- fuel mix, spark advance and so on. The computer relies on a series of sensors to get the information it needs to make decisions on what to do.

The computer knows what readings are in a normal range for various conditions. Get out of range, and it logs a trouble code and lights up the Check Engine warning.

The computer will then try to make adjustments if it can. If the computer can't compensate for the problem, the Check Engine light stays on.

The computer logs a trouble code. Some people think the code will tell the technician exactly what's wrong.

Actually, the code will tell the technician what sensor reading is out of parameters. It can't really tell him why, because there could be any number of causes.

Let's say you're feeling hot. You get your heat sensor out – a thermometer – put it under our tongue and in a minute or two you learn that you have a fever of 104 degrees F (40 degrees C).

You know your symptom – a fever – but you don't know what's causing it. Is it the flu, a sinus infection or appendicitis?

You need more information than just that one sensor reading. But it does give you a place to start and narrows down the possible problems.

There are reports on the internet telling you that you can just go down to an auto parts store and get them to read your trouble code or buy a cheap scan tool to do it yourself.

There are two problems with that. First, the computer stores some trouble codes in short term memory and some in permanent memory. Each manufacturer's computer stores generic trouble codes, but they also store codes that are specific to their brand.

A cheap, generic scan tool, like you can buy online or that the auto parts store uses, doesn't have the ability to retrieve long-term storage or manufacturer specific codes. Your Newark, NY, service center has spent a lot of money on high-end scan tools and software to do a deep retrieval of information from your engine control computer.

The second problem is that once you've got the information, do you know what to do with it? For example, a very common trouble code comes up when the reading on the oxygen sensor is out of whack.

So the common solution is for the auto parts store to sell you a new oxygen sensor — which is not cheap — and send you off on your way. Now your oxygen sensor may indeed have been bad and needed replacing. But the error code could have come from any of a dozen of other problems.

How do you know the right solution? Back to the fever analogy, do you need surgery or an aspirin? Leave it to the pros at Union Street Automotive. Give us a call and let us help you resolve your check engine light issue.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

All Lined Up: Wheel Alignment Service at Union Street Automotive

When all of your vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Hitting a road hazard or even just the normal bumps and bounces of everyday driving in Newark can cause your vehicle's wheels to be out of alignment.

Driving for an extended time around Newark when your wheels are out of alignment results in uneven tire wear. This is dangerous … and expensive. Worst case scenario, you have a blowout on a crowded NY highway. It can also cause premature wear to your suspension system, which can be really expensive to repair. At the very least, you may have to replace your tires years too early.

The ideal alignment for your vehicle was designed by its engineers. Alignment service at Union Street Automotive starts with an inspection of the steering and suspension – to see if anything's bent or broken. Then your friendly and knowledgeable Union Street Automotive technician will look at tire condition.

From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. The wheels are then aligned to vehicle’s specifications.

Your vehicle owner's manual probably has a recommendation for how often your alignment should be checked – usually every couple of years. If you suspect an alignment problem, get it checked at Union Street Automotive before you suffer expensive tire or suspension damage.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net